Novell NETWARE 6-DOCUMENTATION Manual page 2582

RCONAG6
Purpose
Syntax
144 Utilities Reference
RCONAG6.NLM is the RConsoleJ Agent. Load this NLM
console to allow remote console access to the server, using RConsoleJ Client.
LOAD RCONAG6 [ENCRYPT] [-Edigest | password IP_port
IPX_port secure_IP_port]
Parameter
(no parameter)
ENCRYPT
-Edigest
password
IP_port
Use to
Load RCONAG6 without command line parameters.
You will be prompted for a password, IP port number,
and IPX port number, Secure IP port number.
TM
Encrypt the password and create a
SYS:SYSTEM\LDRCONAG.NCF script file if desired.
This script file can be used to load RCONAG6 at startup.
(by inserting LDRCONAG.NCF in AUTOEXEC.NCF).
Specify an encrypted password (digest) that will be used
at the command line.
To use this parameter, you need to load RCONAG6
using the ENCRYPT option.
This parameter is used in the LDRCONAG.NCF file (if
you create the file using the ENCRYPT option).
Specify the password you want administrators of the
remote server to use.
Specify the IP port number that RCONAG6 will listen for
RConsoleJ or a proxy server on.
The default is 2034.
-1 disables IP listening.
0 allows a dynamically assigned port to be used.
at the server
TM