Novell NETWARE 6-DOCUMENTATION Manual page 2577

PPPCON
Purpose
PPPRNCON
Purpose
PPPTRACE
Purpose
To start sending packets, press Esc. The sending node continues to send
request packets and collect response time statistics until you press Esc
again to exit PING.
To select additional IP nodes, press Insert. Enter the hostname or IP
address of the node in the Host Name field. Press Esc to start sending
packets.
Use PPPCON to view Point-to-Point Protocol (PPP) interface configuration
and statistical information.
Use PPPRNCON to configure Point-to-Point Protocol Remote Node Service
(PPPRNS) options. You can use this utility by loading NIASCFG and
selecting Configure NIAS > Remote Access > Configure Service > PPPRNS.
The PPPTRACE utility enables you to debug PPP data link problems.
PPPTRACE fully decodes and displays PPP protocol exchanges. You can also
examine network protocol data that flows through the PPP link in a partially
decoded format.
Because each captured frame is time-stamped to an accuracy of one-tenth of
a second, PPPTRACE can also provide valuable timing information.
Utilities 139