Novell NETWARE 6-DOCUMENTATION Manual page 2589

Additional Information
RECORD
Purpose
Syntax
To
Begin recording console commands into a memory
batch file called MYLIST1
Close the recording session for the temporary batch
file named MYLIST1
Type the command sequences in the session
named MYLIST1
Remove the recorded session named MYLIST1
from server memory
If you don't enter the NSS volume name parameter, you will be prompted
to select it.
Topic
Maintaining NSS volumes
Setting up NSS volumes
Use at the server console to record command sequences that you enter at the
console over and over. The RECORD command creates a temporary batch file
on the server. You can then save the temporary batch file as an .NCF file or
delete it from memory.
RECORD [ACTION] | [temporary batch file name]
For example:
See
Viewing Storage Objects
Setting Up and Configuring Novell Storage
Services in the Novell Storage Services
Administration Guide
Enter
RECORD START MYLIST1
RECORD STOP
RECORD TYPE MYLIST1
RECORD KILL MYLIST1
Utilities 151