Novell NETWARE 6-DOCUMENTATION Manual page 2583

Using RCONAG6
Parameter Use to
IPX_port
secure_ IP_port
If the target server runs Streams-based SPX
spxs.nlm before loading RCONAG6. See
Remote Server Management Guide.
Before accessing a target server using RConsoleJ, load RCONAG6 on the
server. When you load RCONAG6, you establish a password that must be
entered when you execute RConsoleJ.
To optimize security, use an encrypted password when loading
RCONAG6.
To encrypt the password, enter
RCONAG6 ENCRYPT
The system prompts for a password. Enter the password. The password is
encrypted and two options are provided:
(Recommend) Create LDRCONAG.NCF, containing the script, to
load RCONAG6.NLM with the encrypted password. This ensures
that your password is in clear text. Additionally, you need not
remember the password to load RCONAG6.NLM with the encrypted
password.
Load the RCONAG6.NLM without creating LDRCONAG.NCF
Specify the IPX port number that RCONAG6 will listen
for a proxy server on.
The default is 16800.
-1 disables IPX listening.
0 allows a dynamically assigned port to be used.
Specify the Secure IP port number that RCONAG6 will
listen for RConsoleJ on a SSL-based port on.
The default is 2036.
-1 disables Secure IP listening.
0 allows a dynamically assigned port to be used.
services, you must load the
TM
Setting Up RConsoleJ
Utilities 145
in the