Instance - HP E4510-48G Command Reference Manual

4510g series
Table of Contents

Advertisement

Description
Use the display stp tc command to view the statistics of TC/TCN BPDUs received and sent by all
ports in an MSTI or all MSTIs.
Note that:
If you do not specify an MSTI ID, this command will display the statistics of TC/TCN BPDUs
received and sent by all ports in all MSTIs. The displayed information is sorted by instance ID and
by port name in each MSTI.
If you specify an MSTI ID, this command will display the statistics of TC/TCN BPDUs received and
sent by all ports in the specified MSTI, in port name order.
Examples
# View the statistics of TC/TCN BPDUs received and sent by all ports on the IRF member device 1 in
MSTI 0.
<Sysname> display stp instance 0 tc slot 1
-------------- STP slot 1 TC or TCN count -------------
MSTID
Port
0
GigabitEthernet1/0/1
0
GigabitEthernet1/0/2
Table 4-9 display stp tc command output description
Field
MSTID
Port
Receive
Send

instance

Syntax
instance instance-id vlan vlan-list
undo instance instance-id [ vlan vlan-list ]
View
MST region view
Default Level
2: System level
Parameters
instance-id: MSTI ID. The minimum value is 0, representing the CIST, and the maximum value is 32.
vlan vlan-list: Specifeis a VLAN list in the format of vlan-list = { vlan-id [ to vlan-id2 }&<1-10>, in which
vlan-id represents the VLAN ID and ranges from 1 to 4094. &<1-10> indicates you can specify up to 10
VLAN IDs or VLAN ID ranges.
Receive
Send
6
4
0
2
MSTI ID
Port name
Number of TC/TCN BPDUs received on each port
Number of TC/TCN BPDUs sent by each port
4-14
Description

Advertisement

Table of Contents
loading

Table of Contents