HP E4510-48G Command Reference Manual page 100

Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port Status Priority Oper-Key Flag
-------------------------------------------------------------------------
GE1/0/6 S
GE1/0/12 S
Remote:
Actor Partner Priority Oper-Key SystemID
-------------------------------------------------------------------------
GE1/0/6 32
GE1/0/12 26
Table 2-5 display link-aggregation verbose command output description
Field
Loadsharing Type
Port Status
Flags
Aggregation Interface
Aggregation Mode
System ID
Local:
Port Status Priority
Oper-Key Flag
32768 2 {ACDEF}
32768 2 {ACDEF}
32768 2 0x8000, 000f-e267-57ad {ACDEF}
32768 2 0x8000, 000f-e267-57ad {ACDEF}
Loadsharing type:
Shar for load sharing
NonS for non-load sharing
Port state: Selected or unselected.
One-octet LACP state flags field. From the least to the most significant
bit, they are represented by A through H as follows:
A indicates whether LACP is enabled. 1 for enabled and 0 for
disabled.
B indicates the timeout control value. 1 for short timeout, and 0 for
long timeout.
C indicates whether the link is considered as aggregatable by the
sending system. 1 for true, and 0 for false.
D indicates whether the link is considered as synchronized by the
sending system. 1 for true, and 0 for false.
E indicates whether the sending system considers that collection of
incoming frames is enabled on the link. 1 for true and 0 for false.
F indicates whether the sending system considers that distribution of
outgoing frames is enabled on the link. 1 for true and 0 for false.
G indicates whether the receive state machine of the sending system
is using default operational partner information. 1 for true and 0 for
false.
H indicates whether the receive state machine of the sending system
is in the expired state. 1 for true and 0 for false.
If a flag bit is set to 1, the corresponding English letter that otherwise is
not output is displayed.
Name of the aggregate interface
Type of the aggregation group: Static for static aggregation, and
Dynamic for dynamic aggregation.
Local system ID, which comprises the system LACP priority and the
system MAC address.
Other information of the local end, including the member ports, port
state, port LACP priority, operational key, and LACP protocol state flags.
2-9
Flag
Description