Stp Region-Configuration; Stp Root Primary - HP E4510-48G Command Reference Manual

stp region-configuration

Syntax
stp region-configuration
undo stp region-configuration
View
System view
Default Level
2: System level
Parameters
None
Description
Use the stp region-configuration command to enter MST region view.
Use the undo stp region-configuration command to restore the default MST region configurations.
By default, the default settings are used for all the three MST region parameters. Namely, the device's
MST region name is the device's MAC address, all VLANs are mapped to the CIST, and the MSTP
revision level is 0.
After you enter MST region view, you can configure the MST region-related parameters, including the
region name, VLAN-to-instance mappings and revision level.
Examples
# Enter MST region view.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region]

stp root primary

Syntax
stp [ instance instance-id ] root primary
undo stp [ instance instance-id ] root
View
System view
Default Level
2: System level
Parameters
instance instance-id: Configures the device as the root bridge in a particular MSTI. The minimum
value of instance-id is 0, representing the CIST, and the maximum value of instance-id is 32.
4-32