Lacp System-Priority; Link-Aggregation Load-Sharing Mode (System View) - HP E4510-48G Command Reference Manual

Examples
# Set the LACP priority of GigabitEthernet 1/0/1 to 64.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lacp port-priority 64

lacp system-priority

Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Default Level
2: System level
Parameters
system-priority: LACP priority of the local system, in the range of 0 to 65535.
Description
Use the lacp system-priority command to set the LACP priority of the local system.
Use the undo lacp system-priority command to restore the default.
By default, the system LACP priority is 32768.
Examples
# Set the system LACP priority to 64.
<Sysname> system-view
[Sysname] lacp system-priority 64

link-aggregation load-sharing mode (system view)

Syntax
link-aggregation load-sharing mode { destination-ip | destination-mac | destination-port |
ingress-port | source-ip | source-mac | source-port } *
undo link-aggregation load-sharing mode
View
System view
Default Level
2: System level
2-12