Nortel DMS-100 Series Maintenance Manual page 573

e Push the card toward the backplane until it plugs fully into the backplane
socket.
7 You have completed this procedure. Return to the main procedure that sent
you to this procedure and continue as directed.
Note: Card shrouds are required for inserting or removing cards in line
drawers. Two sizes are available for use with 3-inch and 6-inch cards.
Descriptions of these shrouds are as follows:
Line Card Insertion/Withdrawal Tool (3 in.)
QTH56A (Apparatus Code)
A0298291) (Common Product Code)
Line Card Insertion/Withdrawal Tool (6 in.)
QTH58A (Apparatus Code)
A0313317) (Common Product Code)
Card Removal Tool (3 in. or larger)
QTH57A (Apparatus Code)
A0298292 (Common Product Code)
Large grip tool for 4 inch or larger cards is NT tool ITA9953
OPM card replacement procedures
Replacing a line card
DMS-100 Family OPM Maintenance Manual XPM14 and up
8-233
(end)