Nortel DMS-100 Series Maintenance Manual page 524

8-184 OPM card replacement procedures
NT6X71
in an OPM
(continued)
Replacing an NT6X71 card in an OPM
At your Current Location
1
At the MAP terminal
2
LCC PTY RNG .....LEN..........
1FR
3
4
5
297-8361-550 Standard 04.01 September 2000
Obtain a replacement card. Ensure that the replacement card has the same
product equipment code (PEC), including suffix, as the card to be removed.
Access the line test position (LTP) level of the MAP display and post the line
associated with the card to be replaced by typing
>MAPCI;MTC;LNS;LTP;POST L site lcm lsg ckt
and pressing the Enter key.
where
site
is the name of the site where the OPM is located
lcm
is the number of the OPM with the faulty card
lsg
is the number of the line subgroup with the faulty card
ckt
is the number of the circuit associated with the faulty card
Example of a MAP display:
REM1 00 0 03 03
Check the status of the posted line.
If the line status is
ManB
not ManB
Busy the line by typing
>BSY
and pressing the Enter key.
Go to the common replacing a line card procedure in this document. When
you have completed the procedure, return here.
DN STA F S LTA TE RESULT
7213355 MB
Do
step 5
step 4