Nortel DMS-100 Series Maintenance Manual page 143

Hide thumbs Also See for DMS-100 Series:

Table of Contents

Figure 18 SREX scheduling

Note 1: The REX tests can run on LCM 0 and LCM 1 at the same time as

REX tests that run on RCC 0 and LGC 0.

Note 2: The REX tests cannot be run on LCM 2 through LCM 7 if a REX

test runs on LGC 0.

Separate the LCM_REX_TEST and the LCMCOV_REX_TEST. This action

allows faster completion of site REX_TEST coverage. The

LCM_REX_TESTs works without constraints of the converter voltage and

ring tests. The LCM_REX_TESTs can run at the same time and scheduled

separately for optimum execution periods.

Note: Perform LCMCOV_REX_TEST on LCMs, XLCMs and OPMs.

Feature AF3234 provides the following REX test improvements for LCM

peripherals and the variants, like LCME:

ESA REX test

LCM and ESA-independent REX test

MAP command for manual REX test

fault indicators

DMS-100 Family OPM Maintenance Manual ISN07 (TDM)/SN07 (DMS) and up

Functional overview 2-67

Troubleshooting