Nortel DMS-100 Series Maintenance Manual page 420

8-80 OPM card replacement procedures
NT2X90
in an OPM RMM
7
8
297-8361-550 Standard 04.01 September 2000
(continued)
DANGER
Equipment damage
Take these precautions when removing or inserting a card:1.
Do not apply direct pressure to the components.2 .Do not
force the cards into the slots.
Open the locking levers on the replacement card.
Align the card with the slots in the shelf and gently slide the card into the shelf.
Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure that the card is fully seated in the shelf.
b Close the locking levers.