Nt2X70 In An Opm Hie - Nortel DMS-100 Series Maintenance Manual

8-62 OPM card replacement procedures
NT2X70
in an OPM HIE
Summary of card replacement procedure for an NT2X70 card in an HIE shelf
At PM level, post
and busy the
LCM unit.
Post and busy
the ESA
processor
Power down the
NT2X70 card in
the HIE shelf
Replace the card
with one having
identical PEC
297-8361-550 Standard 04.01 September 2000
(continued)
Power up the
NT2X70 card in
the HIE shelf
RTS the LCM
unit
Reload and RTS
the ESA
processor
End of procedure
This flowchart summarizes the
procedure.
Use the instructions in the
procedure that follows this
flowchart to perform the
procedure.