Nortel DMS-100 Series Maintenance Manual page 531

Summary of card replacement procedures for an NT6X74 card in an RMM
At the TRKS;TTP
level, post the RMM
Is the RMM
status ManB?
N
Busy the trunks
associated with the
RMM
At PM level, post
and busy the RMM
Replacing an NT6X74 card in an RMM
At your Current Location
1
2
Y
Replace card with
one having identical
PEC
Obtain a replacement card. Ensure that the replacement card has the same
product equipment code (PEC), including suffix, as the card that is to be
removed.
If you were directed to this procedure from another maintenance procedure,
go to step 8; otherwise, continue with step 3.
DMS-100 Family OPM Maintenance Manual XPM14 and up
OPM card replacement procedures
in an OPM RMM
This flowchart summarizes the
procedure.
Use the instructions in the
procedure that follows this
flowchart to perform the
procedure.
At PM level, post
and load the RMM
8-191
NT6X74
(continued)
Return the RMM to
service
At TTP level, post
the RMM and return
trunks to service
End of procedure