Nortel DMS-100 Series Maintenance Manual page 307

where
link_no
is the number of a P-side link busied in step 13
If test
passed
failed
15 To return the busied link to service, type
>RTS LINK link_no
and press the Enter key.
where
link_no
is the number of a P-side link busied in step 12
If RTS
passed and no other links are
SysB
passed but other links are SysB
failed
16 To display P-side links, type
>TRNSL P
and press the Enter key.
Example of a MAP response:
Link 0: RMM 0
Link 1: RMM 0
Link 2: ESA 0
Link 3: ESA 0
17 To post the RMM or ESA processor that has faults (if equipped), type
>POST module module_no
and press the Enter key.
where
module
is the name of the P-side module (RMM or ESA)
module_no
is the number of the RMM or ESA processor
OPM alarm clearing procedures
0;Cap MS;Status:PBsy ,P;MsgCond:CLS
1;Cap MS;Status:PBsy ,P;MsgCond:CLS
0;Cap M ;Status:OK
1;Cap M ;Status:OK
DMS-100 Family OPM Maintenance Manual XPM14 and up
minor
Do
step 15
step 22
Do
step 27
step 13
step 30
,P;MsgCond:OPN
,P;MsgCond:OPN
7-87
LCM
(continued)