Nortel DMS-100 Series Maintenance Manual page 561

27 Reload the ESA processor by typing
>LOADPM
and pressing the Enter key.
If loadpm
passes
fails
28 Query the PM counters for the firmware load on the NTMX45 by typing
>QUERYPM CNTRS
and pressing the Enter key.
Example of a MAP display:
Unsolicitited MSG limit = 250, count = 0
Ram Load: MSA12AM1
EPRom Version: Ac01
EEPRom Load: Loadable:
EP:MX45AA
If firmware is
valid
invalid
29 Load the NTMX45 firmware by typing
>LOADFW
and pressing the Enter key.
Note: The command applies the firmware file provisioned in table
XESAINV unless the firmware load is indicated with the command.
If load
passes
fails
30 Upgrade the firmware in the NTMX45AA by typing
>LOADFW UPGRADE
OPM card replacement procedures
NP02
, Executable:
NTMX45 Firmware loadname
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM HIE
Do
step 28
step 35
NP02
Do
step 31
step 29
Do
step 30
step 35
8-221
NTMX45
(continued)