Nortel DMS-100 Series Maintenance Manual page 295

7 To load the RMM, type:
>LOADPM
and press the Enter key.
If
the system displays the message
load file not found in
directory
load passes
load fails
8 Determine the type of device where the PM load files are located.
If load files
are on a tape
are on an IOC disk
are on an SLM disk
9 Locate the tape containing the PM load files.
At the IOE frame
10 Mount the tape on a magnetic tape drive.
At the MAP terminal
11 To download the tape, type:
>MOUNT tape_no
and press the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
12 To list the contents of the tape in your user directory, type:
>LIST T tape_no
and press the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
13 To demount the tape drive, type:
>DEMOUNT T tape_no
OPM alarm clearing procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
major
Do
step 8
step 32
step 36
Do
step 9
step 15
step 20
7-75
RMM
(continued)