Nortel DMS-100 Series Maintenance Manual page 317

link_no
is the number of the the P-side link that has defects from step 7
9 To test the manually busied (ManB) link, type:
>TST LINK link_no
and press the Enter key.
where
link_no
is the number of the manually busy link (0 or 1) from step 8
If
TST PASSED
TST FAILED
10 To return the link to service, type:
>RTS LINK link_no
and press the Enter key.
where
link_no
is the number of the link (0 or 1) tested in step 9
If
RTS PASSED
RTS FAILED
11 Determine if you have to clear additional links.
If the links that have defects
have cleared
have not cleared
12 To post the RMM, type:
>POST RMM rmm_no
and press the Enter key.
where
rmm_no
is the number of the posted RMMs
13 To test the RMM, type:
>TST
OPM alarm clearing procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
minor
Do
step 10
step 16
Do
step 11
step 16
Do
step 12
step 7
7-97
RMM
(continued)