Nortel DMS-100 Series Maintenance Manual page 549

Summary of card replacement procedure for an NT8X02 card in an BCU
Post the
OPM PES
Busy the
BCC card
Power down
the BCC
card
Remove and
replace faulty
card
Power up
the BCC
card
Perform
diagnostics
Return to
service the
BCC card
End of
procedure
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM BCU
This flowchart summarizes the
procedure.
Use the instructions in the
procedure that follows this
flowchart to perform the
procedure.
8-209
NT8X02
(continued)