Nortel DMS-100 Series Maintenance Manual page 541

15 Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
16 Locate the tape that contains the PM load files.
At the OPM cabinet
17 Mount the tape on a magnetic tape drive.
At the MAP display
18 Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
19 List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
20 Demount the tape by typing
>DEMOUNT T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
21 Go to step 32.
22 From office records, determine and note the number of the input/output
controller (IOC) disk and the name of the volume that contains the PM load
files.
23 Access the disk utility level of the MAP by typing
>DSKUT
and pressing the Enter key.
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM HIE
Do
step 16
step 22
step 27
8-201
NT6X75
(continued)