Nortel DMS-100 Series Maintenance Manual page 502

8-162 OPM card replacement procedures
NT6X53
in an OPM
(continued)
14
15
At the OPM cabinet
16
At the MAP display
17
18
19
20
21
297-8361-550 Standard 04.01 September 2000
If
load fails
Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
Locate the tape that contains the PM load files.
Mount the tape on a magnetic tape drive.
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files.
Release the tape drive from your user directory by typing:
>DEMOUNT T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive mounted in step 17.
Go to step 31.
From office records, determine and note the number of the input/output
controller (IOC) disk and the name of the volume that contains the PM load
files.
Do
step 37
Do
step 15
step 21
step 26