Nortel DMS-100 Series Maintenance Manual page 465

and pressing the Enter key.
17 List the IOC file names into your user directory by typing
>LISTVOL volume_name ALL
and pressing the Enter key.
where
volume_name
is the name of the volume that contains the PM load files, obtained in
step15
18 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
19 Go to step 25.
20 From office records, determine and note the number of the system load
module (SLM) disk and the name of the volume that contains the PM load
files.
21 Access the disk utility level of the MAP display by typing
>DISKUT
and pressing the Enter key.
22 List all SLM disk volumes into your user directory by typing
>LV CM
and pressing the Enter key.
23 List the SLM file names into your user directory by typing
>LF volume_name
and pressing the Enter key.
where
volume_name
is the name of the volume that contains the PM load files, obtained in
step 20
24 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
25 Reload the ESA processor by typing
>LOADPM
and pressing the Enter key.
If loadpm
failed
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM HIE
Do
step 29
8-125
NT6X45
(continued)