Nortel DMS-100 Series Maintenance Manual page 559

9 Load the ESA processor by typing
>LOADPM
and pressing the Enter key.
If the load
message "loadfile not found in
directory" is received
load passes
load fails
10 Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
11 Locate the tape that contains the PM load files.
12 Mount the tape on a magnetic tape drive.
At the MAP terminal
13 Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
14 List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
15 Demount the tape by typing
>DEMOUNT T
and pressing the Enter key.
where
OPM card replacement procedures
tape_no
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM HIE
Do
step 10
step 28
step 35
Do
step 11
step 17
step 22
8-219
NTMX45
(continued)