Nortel DMS-100 Series Maintenance Manual page 525

At the MAP
6 Test the line card just replaced by typing
>DIAG
and pressing the Enter key.
If the DIAG
passed
failed
7 Return the line card to service by typing
>RTS
and pressing the Enter key.
If RTS
passed
failed
8 Send any faulty cards for repair according to local procedure.
9 Record the following items in office records:
• date the card was replaced
• serial number of the card
• symptoms that prompted replacement of the card
Go to step 11.
10 Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
11 You have successfully completed this procedure.
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM
Do
step 7
step 10
Do
step 8
step 10
8-185
NT6X71
(end)