Nortel DMS-100 Series Maintenance Manual page 491

14 Go to step 25.
15 From office records, determine and note the number of the input/output
controller (IOC) disk and the name of the volume that contains the PM load
files.
16 Access the disk utility level of the MAP by typing
>DSKUT
and pressing the Enter key.
17 List the IOC file names into your user directory by typing
>LISTVOL volume_name ALL
and pressing the Enter key.
where
volume_name
is the name of the volume that contains the PM load files obtained in
step 15
18 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
19 Go to step 25.
20 From office records, determine and note the number of the system load
module (SLM) disk and the name of the volume that contains the PM load
files.
21 Access the disk utility level of the MAP by typing
>DISKUT
and pressing the Enter key.
22 List the SLM disk volume names by typing
>LV CM
and pressing the Enter key.
23 List the SLM file names into your user directory by typing
>LF volume_name
and pressing the Enter key.
where
volume_name
is the name of the volume that contains the PM load files,obtained in
step 20
24 Leave the disk utility by typing
>QUIT
and pressing the Enter key.
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
NT6X52
in an OPM
(continued)
8-151