Nortel DMS-100 Series Maintenance Manual page 296

7-76 OPM alarm clearing procedures
RMM
major
(continued)
14
15
16
17
18
19
20
21
22
23
297-8361-550 Standard 04.01 September 2000
and press the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
Go to step 24.
From office records, determine and note the number of the input/output
controller (IOC) disk. Note the name of the volume containing the PM load
files.
To access the disk utility level of the MAP type:
>DSKUT
and press the Enter key.
To list the IOC file names in your user directory, type:
>LISTVOL volume_name ALL
and press the Enter key.
where
volume_name
is the name of the volume containing the PM load files obtained in step
15
To leave the disk utility, type:
>QUIT
and press the Enter key.
Go to step 24.
From office records, determine and note the number of the system load
module (SLM) disk. Note the name of the volume containing the PM load
files.
To access the disk utility level of the MAP, type:
>DISKUT
and press the Enter key.
To list the SLM file names in your user directory, type:
>LF volume_name
and press the Enter key.
where
volume_name
is the name of the volume containing the PM load files obtained in step
20
To leave the disk utility, type:
>QUIT
and press the Enter key.