Nortel DMS-100 Series Maintenance Manual page 539

At the MAP display
4 Post the LCM associated with the faulty NT6X75 card by typing
>MAPCI;MTC;PM;POST LCM site frame lcm
and pressing the Enter key.
where
site
is the name of the location of the OPM
frame
is the number of the OPM cabinet
lcm
is the number of the LCM in the OPM cabinet
5 Translate the links to the P-side peripherals by typing
>TRNSL P
and pressing the Enter key.
6 Post the Emergency Stand-Alone (ESA) processor by typing
>POST ESA esa_no
and pressing the Enter key.
where
esa_no
is the number of the ESA processor identified in step 5.
7 Busy the ESA processor by typing
>BSY
and pressing the Enter key.
Example of a MAP response:
This action will take this PM out of service
Please confirm ("Yes" or "No")
Respond by typing
>YES
and pressing the Enter key.
8 Post the LCM associated with the faulty NT6X75 card by typing
>POST LCM site frame lcm
and pressing the Enter key.
where
site
is the name of the location of the OPM
frame
is the number of the OPM cabinet
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM HIE
8-199
NT6X75
(continued)