Nortel DMS-100 Series Maintenance Manual page 306

7-86 OPM alarm clearing procedures
LCM
minor
(continued)
10
11
12
13
14
297-8361-550 Standard 04.01 September 2000
To busy the SysB unit, type
>BSY UNIT unit_no
and press the Enter key.
where
unit_no
is the number of the SysB unit
Example of a MAP response:
LCM REM1 00 0
Unit0: InSv
Unit1: ManB
Drwr: 01 23 45 67 89 01 23 45 67 89
.. .. .. .. .. .. .. .. .. ..
To post the host peripheral (LGC, LTC, or RCC), type
>POST pm_type
and press the Enter key.
where
pm_type
is LGC, LTC, or RCC
pm_no
is the number of the host peripheral
To identify the P-side links that have faults, type
>TRNSL P
and press the Enter key.
Example of a MAP response:
Link 2: LCM REM1 00 0
Link 6: LCM REM1 00 0
Record information for the links that have a status other than OK.
To choose and busy the link that has faults, type
>BSY LINK link_no
and press the Enter key.
where
link_no
is the number of a P-side link identified in step 12
To test the busied link, type
>TST LINK link_no
and press the Enter key.
ISTb Links OOS: Cside
/RG: 0
/RG: 0
11 11 11 11 11 RG: Pref 0 InSv
pm_no
2;Cap MS;Status: OK
1;Cap MS;Status: SysB,;MsgCond: CLS
0 Pside 0
Stby 1 InSv
;MsgCond: OPN