Nortel DMS-100 Series Maintenance Manual page 567

9 Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure that the card is fully seated in the shelf.
b Close the locking levers.
10 Reconnect any previously removed cables to the faceplate of the
replacement card.
11 You have completed this procedure. Return to the main procedure that sent
you to this procedure and continue as directed.
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
Replacing a card
8-227
(end)