Nortel DMS-100 Series Maintenance Manual page 327

Alarm display
CM
.
Indication
The alarm code PES, under the peripheral module (PM) header, indicates a
power and environment system (PES) alarm in an Outside Plant Module
(OPM). The MAP terminal displays the following information under the PES
alarm according to how important the alarm is:
Alarm
critical
major
minor
At the PES level of the MAP terminal, software displays the number of OPMs
in different maintenance states. The states are red, amber, green, and offline
(OFFL). The following example of a display at the PES level of the MAP
displays the following information. One OPM is in the RED state. Two OPMs
are in the AMBER state. Three OPMs are in the GREEN state. One OPM is
in the OFFL state.
Example of a MAP response:
For more detailed information about an OPM that has a PES alarm, enter the
POST command. Enter this command with a correct parameter (for example,
POST GREEN) at the PES level of the MAP display. When you enter the
POST command, a display like the following one appears on the MAP display:
MS IOD Net
. . .
RED AMBER
PES 1 2
DMS-100 Family OPM Maintenance Manual XPM14 and up
OPM alarm clearing procedures 7-107
PM CCS Lns
nPES . .
M
Information displayed under PES
*C*
M
a blank space
GREEN OFFL
3 1
PM PES
critical, major, minor
Trks Ext Appl
. . .