Nt6X54 In An Opm - Nortel DMS-100 Series Maintenance Manual

Application
Use this procedure to replace the following card in an OPM.
PEC
NT6X54
NT6X54
Common procedures
None
Action
The following flowchart is only a summary of the procedure. To replace the
card, use the instructions in the step-action procedure that follows the
flowchart.
Suffixes Name
AA Bus interface card (BIC)
DA ISDN drawer controller (IDC) card (BIC)
Note: Peripherals with ISDN line drawer for remotes
(ILDR) must use the NT6X54DA card. ILDR is first
available for remote switching center-SONET (RSC-S)
and remote switching center (RSC) configurations in
the NA007/XPM08 timeframe. ILDR is first available
for remote line concentrating module (RLCM), outside
plant module (OPM), and outside plant access cabinet
(OPAC) configurations in the NA008/XPM81
timeframe.
DMS-100 Family OPM Maintenance Manual XPM14 and up
OPM card replacement procedures 8-165
NT6X54
in an OPM