Nortel DMS-100 Series Maintenance Manual page 325

Example of a MAP display :
REM1 ESA
14 To busy the posted ESA processor, type:
>BSY
and press the Enter key.
MAP response :
This action will take this PM out of service
Please confirm ("Yes" or "No")
To confirm busy, type:
>YES
and press the Enter key.
15 To test the ESA processor, type:
>TST
and press the Enter key.
If test
passes
fails because of loading error
fails and the system produces a cardlist
fails but the system does not produce a cardlist
16 To attempt to reload the ESA processor, type:
>LOADPM
and press the Enter key.
If load
passes
fails
17 The card list identifies the cards that can have faults. Replace the cards one
at a time in the order listed.
If all cards on the list
are replaced
are not replaced
OPM alarm clearing procedures
0 SysB
DMS-100 Family OPM Maintenance Manual XPM14 and up
critical, minor
Do
step 18
step 16
step 17
step 20
Do
step 15
step 20
Do
step 20
step 19
7-105
ESA
(continued)