Nortel DMS-100 Series Maintenance Manual page 529

8 If you were directed to this procedure from another maintenance procedure,
return now to the alarm clearing procedure that directed you here; otherwise,
continue with step 9.
At the MAP terminal
9 Return the busied unit to service by typing
>RTS UNIT lcm_unit
and pressing the Enter key.
where
lcm_unit
is the OPM unit busied in step 6
If RTS
failed
passed
10 Send any faulty cards for repair according to local procedure.
11 Record the following items in office records:
• date the card was replaced
• serial number of the card
• symptoms that prompted replacement of the card
Proceed to step 13.
12 Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
13 You have successfully completed this procedure.
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM HIE
Do
step 12
step 10
8-189
NT6X73
(end)