Nortel DMS-100 Series Maintenance Manual page 271

If
TST FAILED
12 To return the LCM to service, type
>RTS UNIT unit_no
and press the Enter key.
where
unit_no
is the number of the ManB OPM.
13 Determine if RTS is successful.
If
RTS PASSED
RTS FAILED
14 Check the card listing that appears in the following MAP display. The listing
results from step 9.
Example of a MAP response:
SITE FLR RPOS BAY_ID
REM1 01 A00
REM1 01 A00
15 Determine if the user replaced all cards on the list.
If you
replaced all the cards on the list
did not replace all the cards on
the list
Go to Card Replacement Procedures . When you complete the card
16
replacement procedures, go to step 11 of this procedure.
17 For additional help, contact the next level of support.
18 The procedure is complete. If other alarms appear, refer to the correct alarm
clearing procedures for the indicated alarms.
OPM alarm clearing procedures
SHF DESCRIPTION SLOT EQPEC
OPE 00 05 LCM:14 1
OPE 00 19 LCM:14 1
DMS-100 Family OPM Maintenance Manual XPM14 and up
OPM (RG)
major
Do
step 17
Do
step 18
step 14
:01 6X60
:04 6X51
Do
step 17
step 16
7-51
(end)