Nortel DMS-100 Series Maintenance Manual page 533

SysB
PM 0
RMM 0
RMM 0 InSv
7 Busy the RMM by typing
>BSY
and pressing the Enter key.
At the RMM
8 Replace the NT6X74 card using the common replacing a card procedure in
this document. When the card has been replaced, return to this point.
9 If you were directed to this procedure from another maintenance procedure,
return now to the procedure that directed you here and continue as directed;
otherwise, continue with step 10.
At the MAP display
10 Load the RMM by typing
>LOADPM
and pressing the Enter key.
where
rmm_no
is the number of the RMM shelf in which the card is to be replaced
If
message "loadfile not found in
directory" is received
load passed
load failed
11 Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
12 Locate the tape that contains the PM load files.
13 Mount the tape on a magnetic tape drive.
OPM card replacement procedures
in an OPM RMM
ManB Offl
2 2
0 1
DMS-100 Family OPM Maintenance Manual XPM14 and up
CBsy ISTb
0 7
0 0
Do
step 11
step 27
step 32
Do
step 12
step 17
step 22
8-193
NT6X74
(continued)
InSv
21
6