Nortel DMS-100 Series Maintenance Manual page 459

FSP Alarm and control cards
NT0X91AA
card in slot
CD 3
NT0X91AE
NT6X36AA
card in slot
card in slot
CD 2
CD 1
5 Insert the replacement alarm and control card.
6 Close the FSP panel.
7 Tighten the slotted nut on the FSP.
Proceed as follows to reset the converter in each shelf that is controlled by
the alarm and control card you have just replaced.
8 Press the RESET button.
If the CONVERTER FAIL LED is
lit
not lit
9 The next action depends on your reason for performing this procedure.
If you were
directed to this procedure from a maintenance proce-
dure
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM
Do
step 11
step 9
Do
step 10
8-119
NT6X36
(continued)
FSP
cover