Nortel DMS-100 Series Maintenance Manual page 144

2-68 Functional overview
•
•
Emergency stand-alone REX test
The ESA REX tests the ability of OPM units to enter and exit ESA. The ESA
REX tests the ability of OPM units to message the ESA processor when in
ESA. The ESA REX test begins after the LCM REX test completes.
MAP commands for manual REX tests
The XLCM diagnostics provide the capability to implement a manual LCM
REX test. Add a REX or REXCOV parameter to the TST command at the PM
level of the MAP display. This action allows you to perform a manual REX
test. Examples of this command follow:
>MAPCI;MTC;PM;POST LCM <site><frame><unit>
>QUERYPM
When the LCM is posted, to set manual control of scheduled LCM or
LCMCOV REX tests, type
>TST REX [ON] [OFF]
and press the Enter key
or
>TST COVREX [ON] [OFF]
To set LCM REX tests for immediate execution, type
>TST REX NOW
297-8361-550 Standard 04.02 December 2004
REX test maintenance record
MAP commands to access REX test failures
Note: Post the LCM
Note: Displays LCM node information. Feature AF5898 adds information
on the LCMCOV REX test.
Note: The REX test of the posted LCM is enabled or disabled.
Note: The COVREX test of the posted LCM is enabled or disabled.