8-100 OPM card replacement procedures
NT6X19
in an OPM
(end)
At the MAP terminal
6
7
8
9
10
11
297-8361-550 Standard 04.01 September 2000
Test the line card just replaced by typing
>DIAG
and pressing the Enter key.
If DIAG
passed
failed
Return the line card to service by typing
>RTS
and pressing the Enter key.
If RTS
passed
failed
Send any faulty cards for repair according to local procedure.
Record the following items in office records:
•
date the card was replaced
•
serial number of the card
•
symptoms that prompted replacement of the card
Go to step 11.
Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
You have successfully completed this procedure.
Do
step 7
step 10
Do
step 8
step 10