Nortel DMS-100 Series Maintenance Manual page 218

6-6 The OPM recovery procedures
OPM
(continued)
15
16
17
18
19
20
297-8361-550 Standard 04.01 September 2000
and press the Enter key.
where
rmm_no
is the number of the RMM to post in step 13
To busy the RMM, type
>BSY
and press the Enter key.
To load the RMM, type
>LOADPM
and press the Enter key.
If loadpm
passes
fails
To return the RMM to service, type
>RTS
and press the Enter key.
If the rmm
returns to service
fails to return to service
To post the emergency stand-alone (ESA) processor on the P-side of the
LCM, type
>POST ESA esa_no
and press the Enter key.
where
esa_no
is the number of the ESA processor to post in step 13
To busy the ESA processor, type
>BSY
and press the Enter key.
To load the ESA processor, type
>LOADPM
and press the Enter key.
If loadpm
passes
Do
step 17
step 22
Do
step 18
step 22
Do
step 21