8-1
8 OPM card replacement procedures
This chapter contains the card replacement procedures for the Outside Plant
Module (OPM). These procedures are used by maintenance personnel to
remove and replace hardware modules.
Except when used as part of verification or acceptance procedures, these
procedures are used only when referred to by another maintenance procedure,
such as the Alarm Clearing Procedures.
Procedures in the manual are named to correspond with the Northern Telecom
(NT) product equipment code (PEC) and the shelf where the card is to be
replaced. These procedures are arranged in alphabetical order for easy
location.
DMS-100 Family OPM Maintenance Manual XPM14 and up