Nortel DMS-100 Series Maintenance Manual page 373

At the MAP display
13 Go to the PM level and post the RMM, if not already posted, and load the
RMM by typing
>PM;POST RMM rmm_no;LOADPM
and pressing the Enter key.
where
rmm_no
is the number of the RMM associated with the new NT2X09 card
If
message "loadfile not found in
directory" is received
load passes
load fails
14 Determine the type of device on which the RMM load files are located.
If
tape
IOC disk
SLM disk
15 Locate the tape that contains the PM load files.
At the IOE frame
16 Mount the tape on a magnetic tape drive.
At the MAP display
17 Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
18 List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
OPM card replacement procedures
in an OPM RMM
DMS-100 Family OPM Maintenance Manual XPM14 and up
Do
step 14
step 31
step 36
Do
step 15
step 21
step 26
8-33
NT2X09
(continued)