Nortel DMS-100 Series Maintenance Manual page 543

33 Return the ESA processor to service by typing
>RTS
and pressing the Enter key.
If RTS
passed
failed
34 Send any faulty cards for repair according to local procedure.
35 Record the following items in office records:
• date the card was replaced
• serial number of the card
• symptoms that prompted replacement of the card.
Go to step 37.
36 Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
37 You have successfully completed this procedure.
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM HIE
Do
step 34
step 36
8-203
NT6X75
(end)