6-2 The OPM recovery procedures
OPM
Alarm display
CM
.
Application
Use this procedure to recover service in an outside plant module (OPM) when
the following two conditions occur:
•
•
The OPM does not have ac or dc power.
Action
This procedure contains a procedure and a list of steps. Use the flowchart to
review the procedure. Follow the steps to perform the procedure.
297-8361-550 Standard 04.01 September 2000
MS
IOD
Net
.
.
the ac power is interrupted
battery (dc) power is discharged below the low voltage limit
PM
CCS
.
nLCM
.
*C*
Lns
Trks
Ext
.
.
.
Appl
.