Nortel DMS-100 Series Maintenance Manual page 486

8-146 OPM card replacement procedures
NT6X51
in an OPM
(end)
27
28
29
30
31
32
297-8361-550 Standard 04.01 September 2000
and pressing the Enter key.
where
lcm_unit
is the LCM unit to be loaded (0 or 1)
If
load failed
load passed
Return the LCM unit to service by typing
>RTS UNIT lcm_unit
and pressing the Enter key.
where
lcm_unit
is the LCM busied in step 5 (0 or 1)
If RTS
passed
failed
Send any faulty cards for repair according to local procedure.
Record the following items in office records:
• date the card was replaced
• serial number of the card
• symptoms that prompted replacement of the card.
Go to step 32.
Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
Consult office personnel to determine why the component is offline. Continue
as directed by office personnel.
You have successfully completed this procedure.
Do
step 30
step 27
Do
step 28
step 30