Escalation To Manual Maintenance; Loading Esa Static Translations Data - Nortel DMS-100 Series Maintenance Manual

4-30 ESA maintenance overview
messaging functions are the DMS CC to ESA processor messaging
capabilities.
ESA RAM diagnostics
The ESA processor has a RAM diagnostic test. Operating company personnel
can implement this test with the TST command. The system can implement
this test during a RTS. The ESA RAM diagnostic test consists of the following
tests:
•
•
•

Escalation to manual maintenance

Some testing conditions require manual maintenance. The instructions for
manual maintenance are as follows:

Loading ESA static translations data

This section describes how to load the ESA processor manually with static
translations data. Static translations data are the subset of DMS CC translation
data that are downloaded into the ESA processor.
The steps to download static data manually, are as follows:
1. Display the ESA MAP level for the desired OPM.
2. Make sure that the ESA processor is InSv or ISTb.
3. Type: >LOADPM CC ESADATA
4. Press: ENTER
297-8361-550 Standard 04.02 December 2004
a message test
a 6X75 card test that tests the following functions:
— 6X75 status to ESA processor
— ESA processor to 6X75 control
— A-bus interface to ESA processor and memory
— frame interrupt generator
— clock synchronization hardware
— tone generator
— ESA messaging hardware
the 6X75 card test includes the following:
— status and control test
— RAM test
— frame pulse interrupt test
— VCXO clock test