Nortel DMS-100 Series Maintenance Manual page 399

8 Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure that the card is fully seated in the shelf.
b Close the locking levers.
9 Use the following information to determine the next step in this procedure.
If you entered this procedure
from an alarm clearing proce-
dure
from other
OPM card replacement procedures
in an OPM RMM
DMS-100 Family OPM Maintenance Manual XPM14 and up
Do
step 16
step 10
8-59
NT2X59
(continued)