Nortel DMS-100 Series Maintenance Manual page 478

8-138 OPM card replacement procedures
NT6X50
in an OPM HIE
At the MAP display
15
16
17
18
19
297-8361-550 Standard 04.01 September 2000
(continued)
Test the links busied in step 12 by typing
>TST LINK link_no
and pressing the Enter key.
where
link_no
is one of two links associated with the replacement card
Note: Repeat this step for the other link associated with the replacement
card.
If test
failed
passed
Return to service the links busied in step 12 by typing
>RTS LINK link_no
and pressing the Enter key.
where
link_no
is one of two links associated with the replacement card
Note: Repeat this entry for the other link associated with the replacement
card.
If RTS
failed
passed
Determine if there are remaining links to clear.
If there are
remaining links to clear
no remaining links to clear
If you were directed to this procedure from another maintenance procedure,
return now to the procedure that directed you here and continue as directed;
otherwise, continue with step 19.
Determine if an LCM unit is manual busy.
If LCM unit
is ManB
Do
step 24
step 16
Do
step 24
step 17
Do
step 12
step 18
Do
step 20