Nortel DMS-100 Series Maintenance Manual page 513

Note: Repeat this step for the other line subgroup associated with the line
drawer.
If RTS
passed
failed
23 Return the line subgroups to service by typing
>RTS DRWR
and pressing the Enter key.
If RTS
passed
failed
24 Send any faulty cards for repair according to local procedure.
25 Record the following items in office records:
• date the card was replaced
• serial number of the card
• symptoms that prompted replacement of the card
Go to step 27.
26 Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
27 You have successfully completed this procedure.
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM
Do
step 24
step 26
Do
step 24
step 26
8-173
NT6X54
(end)