Table of Contents
Advertisement
Network
SARVAM UMG may be installed typically, in a Public IP Network or in a Private network, behind a NAT Router.
When SARVAM UMG is installed in a Public IP Network,
•
the WAN Port of SARVAM UMG is connected to a Broadband Router/Modem.
•
Public IP is assigned to the WAN Port.
When SARVAM UMG is installed in a Private Network, behind a NAT Router,
•
the WAN Port of SARVAM UMG is connected to the LAN Switch/Hub.
•
Private IP is assigned to the WAN Port.
Depending on your installation scenario, configure the Network Port Parameters.
To configure Network parameters,
•
Click the Basic Settings link to expand.
•
Click the Network link. The Network Parameters page opens.
Matrix SARVAM UMG System Manual
90
Advertisement
Table of Contents
Need help?
Do you have a question about the SARVAM UMG and is the answer not in the manual?