System Activity Log - Matrix Telecom SARVAM UMG System Manual

System Activity Log

The SARVAM UMG monitors all its activities and maintains records of these activities in the System Activity Log.
The System Activity Log has a buffer capacity of 500 records. The Activity Log stores records using the FIFO
method.
The System Activity Log can be downloaded on a computer in form of a report. SARVAM UMG also supports
Syslog Client for System Activity Logs. The Syslog Client enables the system to send activity logs in syslog format
to the remote 'Syslog Server'. You can view the logs on the remote server.
Index of the Type of Activities recorded in the System Activity Log
Event
Activity
Index
1 Matrix SARVAM UMG started:
2 Default Jumper set in Master Card.
3 Display Configuration Type:
4
Card Present: Slot Num:Card Type:
5 Card Status: Slot Num:Card Type:
6 System Network functionality restarted
7 Network Connection Type change:
8 Network IP address change:
9 Network Subnet Mask change:
10 Network Gateway address change:
11 DNS Server address change:
12 Network VLAN/CoS Flag Enabled:
13 Network VLAN/CoS ID Change:
14 SIP Stack Destructed.
15 SIP Stack Constructed.
16 Stun Status:
17 Sync Date-Time with SNTP Server
18 RTC Change
19 System Default
20 System Restart using:
21 System Config file change:
22
Network WAN Link UP
649
:
Description
When the application starts.
Jumper on the CPU Card is set in default position.
Displays Configuration type used by the system.
The Slot Number and Type of cards present in the
system.
Card Status during Power ON.
When network module restarts.
When the Network Connection Type is changed.
When the Network IP Address is changed.
When the Network Subnet is changed.
When the Network Gateway Address is changed.
When the DND Server Address is changed.
VLAN/CoS Flag status.
VLAN ID configured.
When the SIP Stack is Destructed.
When the SIP Stack is Constructed.
Displays the STUN status.
SNTP Server sync with configured Server Address.
When Date-time is changed in the system.
When the system is set to default.
Displays the reason for the system restart.
Displays config file name when parameter is changed.
When WAN port of CPU card is connected and
network link is working.
Matrix SARVAM UMG System Manual